Skip to main content

SRM Power Meters

SRM has been making power meters since the late 80’s. They are best known for their crankset-based units, however have recently rolled out pedals options as well. Available for road, MTB and track, SRM power meters are some of the most precise and consistent power meters available. They are also some of the more costly. Their flagship power meter is the SRM Origin. It features a LOOK carbon crank arm with Trilobe Technology, a rechargeable battery, +/- 1.0% accuracy and a full 2-year warranty. You can also configure it with a range of different chainrings or spindle sizes.

Additional SRM Power Meter Info:


SRM power meters typically come as a complete crankset – spider, chainrings and crank arms. Installation requires you to remove your existing crankset and replace it with the SRM. Assuming you are not changing bottom brackets, this is a pretty straightforward process, but is more involved than say installing a pedal or crank arm.

Their pedal power meters are a bit easier to install. While there are some quick one-time set-up steps, they largely install like a normal set of pedals


Most SRMs run in the 600-800 gram range, with the SRM Origin weighing in at 599 grams, the lightest of the bunch. Remember, when buying a power meter, you are concerned about added weight. Therefore, determine added weight by subtracting the weight of your current crankset.

Power Measurement

SRM crankset power meters measure power at the crank spider. Therefore, they measure both left and right leg power. In addition, like some other crankset-based power meters, they are also able to measure left/right power (power balance).

SRM pedal power meters have a senor in each pedal and therefore can measure the power from both legs in addition to independent left/right power.

Special Features

What sets the SRM power meters apart is their accuracy. They have been making power meters longer than anyone and have the process down to a science. Most units feature SRM’s 144 point calibration protocol, resulting in accuracy up to +/- 1.0%.


These power meters use a rechargeable battery with 100 hour battery life.

Communication Protocol

SRM power meters support both the ANT+ and Bluetooth wireless protocols. Therefore, they are compatible with any head unit (including SRM’s own PowerControl head units), as well as phones, tablets and indoor training apps.


Accuracy is synonymous with SRM. The company uses a 144 point calibration protocol against a known mass measured to the exact gram. This results in an error of less than 1.0% in most cases, better than the industry standard.

Cadence Detection

These power meters use an accelerometer to measure cadence. This just means that the electronics inside the power meter are able to determine your rotational rate. This is how all crankset power meters measure cadence.


These power meters come with a two-year warranty which covers the product from defects in material and workmanship.

Please see our SRM FAQ for more information on SRM power meters and accessories.

Read More
Product Filter

Shop Other SRM Products

Shopping Cart